| 전자부품 데이터시트 검색엔진 |
|
AT83C5111 데이터시트(PDF) 20 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT83C5111 데이터시트(HTML) 20 Page - ATMEL Corporation |
|
20 / 86 page ![]() 20 AT8xC5111 4190A–8051–11/02 Figure 3. Push-pull Output Input Only Configuration The input only configuration is a pure input with neither pull-up nor pull-down. The input only configuration is shown in Figure 5. Figure 4. Input only Ports Description Ports P1, P3 and P4 Every output on the AT8xC5111 may potentially be used as a 20 mA sink LED drive out- put. However, there is a maximum total output current for all ports which must not be exceeded. All port pins of the AT8xC5111 have slew rate controlled outputs. This is to limit noise generated by quickly switching output signals. The slew rate is factory set to approximately 10 ns rise and fall times. The inputs of each I/O port of the AT8xC5111 are TTL level Schmitt triggers with hysteresis. Ports P0 and P2 The high pin-count version of the AT8xC5111 has standard address and data ports P0 and P2. These ports are standard C51 ports (Quasi bi-directional I/O). The control lines are provided on the pins: ALE, PSEN, EA, Reset; RD and WR signals are on the bits P1.1 and P1.0 . Input Pin Strong N P Port latch Data Data Input Pin Data |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |