IMX6SDLCEC datasheet(14/169 Pages) NXP

14 / 169 page

i.MX 6Solo/6DualLite Applications Processors for Consumer Products, Rev. 9, 11/2018

NXP Semiconductors

Modules List

GPIO-1

GPIO-2

GPIO-3

GPIO-4

GPIO-5

GPIO-6

GPIO-7

General Purpose I/O

Modules

System Control

Peripherals

Used for general purpose input/output to external ICs.

Each GPIO module supports 32 bits of I/O.

GPMI

General Purpose

Media Interface

Connectivity

Peripherals

The GPMI module supports up to 8x NAND devices.

40-bit ECC encryption/decryption for NAND Flash

controller (GPMI2). The GPMI supports separate DMA

channels per NAND device.

GPT

General Purpose Timer

Timer Peripherals

Each GPT is a 32-bit “free-running” or “set and forget”

mode timer with programmable prescaler and compare

and capture register. A timer counter value can be

captured using an external event and can be configured

to trigger a capture event on either the leading or trailing

edges of an input pulse. When the timer is configured to

operate in “set and forget” mode, it is capable of

providing precise interrupts at regular intervals with

minimal processor intervention. The counter has output

compare logic to provide the status and interrupt at

comparison. This timer can be configured to run either

on an external clock or on an internal clock.

GPU3Dv5

Graphics Processing

Unit, ver.5

Multimedia

Peripherals

The GPU3Dv5 provides hardware acceleration for 3D

graphics algorithms with sufficient processor power to

run desktop quality interactive graphics applications on

displays up to HD1080 resolution. The GPU3D provides

OpenGL ES 2.0, including extensions, OpenGL ES 1.1,

and OpenVG 1.1

GPU2Dv2

Graphics Processing

Unit-2D, ver 2

Multimedia

Peripherals

The GPU2Dv2 provides hardware acceleration for 2D

graphics algorithms, such as Bit BLT, stretch BLT, and

many other 2D functions.

HDMI Tx

HDMI Tx i/f

Multimedia

Peripherals

The HDMI module provides HDMI standard i/f port to an

HDMI 1.4 compliant display.

HSI

MIPI HSI i/f

Connectivity

Peripherals

The MIPI HSI provides a standard MIPI interface to the

applications processor.

I2C-1

I2C-2

I2C-3

I2C-4

I2C Interface

Connectivity

Peripherals

I2C provide serial interface for external devices. Data

rates of up to 400 kbps are supported.

IOMUXC

IOMUX Control

System Control

Peripherals

This module enables flexible IO multiplexing. Each IO

pad has default and several alternate functions. The

alternate functions are software configurable.

Table 2. i.MX 6Solo/6DualLite Modules List (continued)

Block Mnemonic

Block Name

Subsystem

Brief Description

IMX6SDLCEC 데이터시트(PDF) 14 Page - NXP Semiconductors

IMX6SDLCEC 데이터시트(HTML) 14 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL