HCS08 datasheet(33/316 Pages) NXP

33 / 316 page

MC9S08SG8 MCU Series Data Sheet, Rev. 8

Freescale Semiconductor

Chapter 3



Modes of Operation

3.1

Introduction

The operating modes of the MC9S08SG8 are described in this chapter. Entry into each mode, exit from

each mode, and functionality while in each of the modes are described.

3.2

Features

•

Active background mode for code development

•

Wait mode — CPU shuts down to conserve power; system clocks are running and full regulation

is maintained

•

Stop modes — System clocks are stopped and voltage regulator is in standby

— Stop3 — All internal circuits are powered for fast recovery

— Stop2 — Partial power down of internal circuits, RAM content is retained

3.3

Run Mode

This is the normal operating mode for the MC9S08SG8. This mode is selected upon the MCU exiting reset

if the BKGD/MS pin is high. In this mode, the CPU executes code from internal memory with execution

beginning at the address fetched from memory at 0xFFFE–0xFFFF after reset.

3.4

Active Background Mode

The active background mode functions are managed through the background debug controller (BDC) in

the HCS08 core. The BDC, together with the on-chip debug module (DBG), provide the means for

analyzing MCU operation during software development.

Active background mode is entered in any of the following ways:

•

When the BKGD/MS pin is low during POR or immediately after issuing a background debug

force reset (see Section 5.7.2, “System Background Debug Force Reset Register (SBDFR)”)

•

When a BACKGROUND command is received through the BKGD/MS pin

•

When a BGND instruction is executed

•

When encountering a BDC breakpoint

•

When encountering a DBG breakpoint

After entering active background mode, the CPU is held in a suspended state waiting for serial background

commands rather than executing instructions from the user application program.

HCS08 데이터시트(PDF) 33 Page - NXP Semiconductors

HCS08 데이터시트(HTML) 33 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL