| 전자부품 데이터시트 검색엔진 |
|
SH7041A 데이터시트(PDF) 588 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
SH7041A 데이터시트(HTML) 588 Page - Renesas Technology Corp |
|
588 / 923 page ![]() 550 ADDRB ADDRA Channel 3 Channel 2 Channel 1 Channel 0 ADST ADF ADDRC ADDRD Sampling 3 Sampling 6 A/D conversion 5 Sampling 1 A/D conver- sion 1 A/D conver- sion 3 Conver- sion standby A/D conver- sion 2 Sampling 2 Sampling 4 Sampling 5 A/D conver- sion 4 Conversion standby Conversion standby Set to 1 by software Cleared to 0 by software Conversion standby Conversion standby Conversion stopped Conver- sion result 1 Conver- sion result 2 Conver- sion result 3 Conver- sion result 4 Figure 15.5 A/D Converter Operation Example (Select-Scan Mode) 15.4.3 Group-Single Mode Choose group-single mode when doing A/D conversions for multiple channels. When the ADST bit is set to 1, A/D conversion is started according to the designated conversion start conditions. The ADST bit is held to 1 during A/D conversion and is automatically cleared to 0 when all conversions for the designated input channels are completed. The ADF flag is set to 1 when all conversions for the designated input channels are completed. If the ADIE bit is set to 1 at this time, an ADI interrupt request is generated. The ADF flag is cleared by reading the ADCSR then writing a 0. Figure 15.6 shows an example of operation in the group-single mode when AN0–AN2 are selected. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |