| 전자부품 데이터시트 검색엔진 |
|
UPD17062 데이터시트(PDF) 95 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
UPD17062 데이터시트(HTML) 95 Page - Renesas Technology Corp |
|
95 / 298 page ![]() 93 µPD17062 This program sequentially reads the constant data stored at program memory addresses 0001H to 000CH into the data buffer ( #) and outputs the data to Port0A, Port0B, and Port0C ($). The constant data is left-shifted one bit. As a result, a high-level data is sequentially output to the Port0A, Port0B, and Port0C pins. 10.4 DATA BUFFER AND PERIPHERAL HARDWARE 10.4.1 How to Control Peripheral Hardware The following peripheral hardware units transfer data via the data buffer: • Image display controller • A/D converter • Serial interface • Horizontal synchronizing signal counter • 6-bit D/A converter • Address register • PLL frequency synthesizer The peripheral hardware is controlled by setting the data in the peripheral hardware via the data buffer or reading its data. Each peripheral hardware unit is provided with a data transfer register called a peripheral register. An address, called a peripheral address, is allocated to each peripheral hardware unit. Data transfer between the data buffer and peripheral hardware can be performed by executing a GET or PUT instruction (dedicated to the peripheral register) for the peripheral register. The GET and PUT instructions are described below. The peripheral hardware and data buffer functions are listed in Table 10-1. GET DBF, p; Reads the data of the peripheral register at address p into the data buffer. PUT p, DBF; Writes the data of the data buffer to the peripheral register at address p. There are three types of peripheral registers: Write/read (PUT/GET), write only (PUT), and read only (GET). Device operation when a GET or PUT instruction is executed for a write only (PUT only) or read only (GET only) peripheral register is described below. • When a read (GET) instruction is executed for a write only (PUT only) peripheral register, an undefined value is returned. • When a write (PUT) instruction is executed for a read only (GET only), it has no effect. Be careful when using a 17K series assembler and emulator. For details, see Section 10.6. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |