 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
UPD17062 데이터시트(PDF) 206 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
UPD17062 데이터시트(HTML) 206 Page - Renesas Technology Corp |
|
|
206 / 298 page  204 µPD17062 16.1.1 SIO0CH The SIO0CH flag is used to select the channel of the serial interface. When the SIO0CH flag is set to 0, the serial interface hardware is connected to CH0. When the SIO0CH flag is set to 1, the serial interface hardware is connected to CH1. The external pin of the unselected channels is used as a general-purpose port. Table 16-4 Channel Setting of Serial Interface 16.1.2 SB The SB flag specifies the serial interface protocol. When the SB flag is set to 0, serial I/O mode is specified. When the SB flag is set to 1, two-wire bus mode is specified. Since CH1 does not support two-wire bus mode, the SB flag must be set to 0 when CH1 is used. Table 16-5 Specification of Serial Interface Protocol SIO0CH Channel to be selected 0 CH0 1 CH1 SB Protocol 0 Serial I/O mode 1 Two-wire bus mode |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
