WM8772SEDSSLASHV datasheet(12/73 Pages) WOLFSON

부품명	WM8772SEDS/V

상세설명	24-bit, 192kHz 6-Channel Codec with Volume Control

PDF	73 Pages

Scroll/Zoom	100%

제조업체	WOLFSON [Wolfson Microelectronics plc]

홈페이지	http://www.wolfsonmicro.com

Logo

12 / 73 page

WM8772

Production Data

PD Rev 4.2 October 2005

TERMINOLOGY

Signal-to-noise ratio (dB) - SNR is a measure of the difference in level between the full scale output and the output

with no signal applied. (No Auto-zero or Automute function is employed in achieving these results).

Dynamic range (dB) - DNR is a measure of the difference between the highest and lowest portions of a signal.

Normally a THD+N measurement at 60dB below full scale. The measured signal is then corrected by adding the 60dB

to it. (e.g. THD+N @ -60dB= -32dB, DR= 92dB).

THD+N (dB) - THD+N is a ratio, of the rms values, of (Noise + Distortion)/Signal.

Stop band attenuation (dB) - Is the degree to which the frequency spectrum is attenuated (outside audio band).

Channel Separation (dB) - Also known as Cross-Talk. This is a measure of the amount one channel is isolated from

the other. Normally measured by sending a full scale signal down one channel and measuring the other.

Pass-Band Ripple - Any variation of the frequency response in the pass-band region.

WM8772SEDS/V 데이터시트(PDF) 12 Page - Wolfson Microelectronics plc