전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

ST20-GP1 데이터시트(PDF) 86 Page - STMicroelectronics

부품명 ST20-GP1
상세설명  GPS PROCESSOR
PDF  116 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

ST20-GP1 데이터시트(HTML) 86 Page - STMicroelectronics

Back Button ST20-GP1 Datasheet HTML 82Page - STMicroelectronics ST20-GP1 Datasheet HTML 83Page - STMicroelectronics ST20-GP1 Datasheet HTML 84Page - STMicroelectronics ST20-GP1 Datasheet HTML 85Page - STMicroelectronics ST20-GP1 Datasheet HTML 86Page - STMicroelectronics ST20-GP1 Datasheet HTML 87Page - STMicroelectronics ST20-GP1 Datasheet HTML 88Page - STMicroelectronics ST20-GP1 Datasheet HTML 89Page - STMicroelectronics ST20-GP1 Datasheet HTML 90Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 86 / 116 page
background image
ST20-GP1
86/116
®
PIn register
The data read from this register will give the logic level present on an input pin at the start of the
read cycle to this register. The read data will be the last value written to the register irrespective of
the pin configuration selected.
14.1.2 PIO bit configuration register
The PC1 register is used to configure each of the PIO port bits as an input or output. Writing a 0
configures the bit as an input, a 1 configures the bit as an output.
14.1.3 PIO Input compare and Compare mask registers
The input compare (PComp) register holds the value to which the input data from the PIO port pins
will be compared. If any of the input bits are different from the corresponding bits in the PComp
register, and the corresponding bit in the compare mask (PMask) register is set to 1, then the
internal interrupt signal for the port will be set to 1.
The compare function is sensitive to changes in levels on the pins and so the change in state on
the input pin must be greater in duration than the interrupt response time for the compare to be
seen as a valid interrupt by an interrupt service routine.
PIn
PIO port base address + #10
Read only
Bit
Bit field
Function
0
PIn0
Input data bit 0
1
PIn1
Input data bit 1
2
PIn2
Input data bit 2
3
PIn3
Input data bit 3
4
PIn4
Input data bit 4
5
PIn5
Input data bit 5
Table 14.2 PIn register format
PC1
PIO port base address + #30
Read/Write
Bit
Bit field
Function
0
ConfigData0
Configures the PIO bit 0 as an input or an output.
1
ConfigData1
Configures the PIO bit 1 as an input or an output.
2
ConfigData2
Configures the PIO bit 2 as an input or an output.
3
ConfigData3
Configures the PIO bit 3 as an input or an output.
4
ConfigData4
Configures the PIO bit 4 as an input or an output.
5
ConfigData5
Configures the PIO bit 5 as an input or an output.
Table 14.3 PC1 register format



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com