H838532H datasheet(297/508 Pages) RENESAS

297 / 508 page

Section 9 Timers

Rev. 1.00 May 30, 2008 Page 277 of 484

REJ09B0436-0100

Bit 4: Channel select (CH2)

Bit 4 selects whether ECH and ECL are used as a single-channel 16-bit event counter or as two

independent 8-bit event counter channels. When CH2 is cleared to 0, ECH and ECL function as a

16-bit event counter which is incremented each time an event clock is input to the AEVL pin as

asynchronous event input. In this case, the overflow signal from ECL is selected as the ECH input

clock. When CH2 is set to 1, ECH and ECL function as independent 8-bit event counters which

are incremented each time an event clock is input to the AEVH or AEVL pin, respectively, as

asynchronous event input.

Bit 4

CH2

Description

ECH and ECL are used together as a single-channel 16-bit event counter

(initial value)

ECH and ECL are used as two independent 8-bit event counter channels

Bit 3: Count-up enable H (CUEH)

Bit 3 enables event clock input to ECH. When 1 is written to this bit, event clock input is enabled

and increments the counter. When 0 is written to this bit, event clock input is disabled and the

ECH value is held. The AEVH pin or the ECL overflow signal can be selected as the event clock

source by bit CH2.

Bit 3

CUEH

Description

ECH event clock input is disabled

(initial value)

ECH value is held

ECH event clock input is enabled

Bit 2: Count-up enable L (CUEL)

Bit 2 enables event clock input to ECL. When 1 is written to this bit, event clock input is enabled

and increments the counter. When 0 is written to this bit, event clock input is disabled and the

ECL value is held.

Bit 2

CUEL

Description

ECL event clock input is disabled

(initial value)

ECL value is held

ECL event clock input is enabled

H838532H 데이터시트(PDF) 297 Page - Renesas Technology Corp