H838532H datasheet(300/508 Pages) RENESAS

300 / 508 page

Section 9 Timers

Rev. 1.00 May 30, 2008 Page 280 of 484

REJ09B0436-0100

9.7.3

Operation

(1) 16-bit Event Counter Operation

When bit CH2 is cleared to 0 in ECCSR, ECH and ECL operate as a 16-bit event counter. Figure

9.20 shows an example of the software processing when ECH and ECL are used as a 16-bit event

counter.

Start

End

Clear CH2 to 0

Clear CUEH, CUEL, CRCH, and CRCL to 0

Clear OVH and OVL to 0

Set CUEH, CUEL, CRCH, and CRCL to 1

Figure 9.20 Example of Software Processing when Using ECH and ECL as 16-Bit Event

Counter

As CH2 is cleared to 0 by a reset, ECH and ECL operate as a 16-bit event counter after a reset.

They can also be used as a 16-bit event counter by carrying out the software processing shown in

the example in figure 9.20. The operating clock source is asynchronous event input from the

AEVL pin. When the next clock is input after the count value reaches H'FF in both ECH and ECL,

ECH and ECL overflow from H'FFFF to H'0000, the OVH flag is set to 1 in ECCSR, the ECH and

ECL count values each return to H'00, and counting up is restarted. When overflow occurs, the

IRREC bit is set to 1 in IRR2. If the IENEC bit in IENR2 is 1 at this time, an interrupt request is

sent to the CPU.

H838532H 데이터시트(PDF) 300 Page - Renesas Technology Corp