| 전자부품 데이터시트 검색엔진 |
|
AT90SCR100 데이터시트(PDF) 380 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT90SCR100 데이터시트(HTML) 380 Page - ATMEL Corporation |
|
380 / 433 page ![]() 380 TPR0327AY–SMS–30Jan09 AT90SCR100 Notes: 1. The CKOUT Fuse allow the system clock to be output on PORTB1. See “Clock Output Buffer” on page 40 for details. 2. The default value of SUT1..0 results in maximum start-up time for the default clock source. See Table 7-3 on page 35 for details. 3. These values are fixed. They used to select clocks that are not available for AT90SCR100. The status of the Fuse bits is not affected by Chip Erase. Note that the Fuse bits are locked if Lock bit1 (LB1) is programmed. Program the Fuse bits before programming the Lock bits. 29.2.1 Latching of Fuses The fuse values are latched when the device enters programming mode and changes of the fuse values will have no effect until the part leaves Programming mode. This does not apply to the EESAVE Fuse which will take effect once it is programmed. The fuses are also latched on Power-up in Normal mode. 29.3 Signature Bytes 29.3.1 Device and JTAG IDs All Atmel microcontrollers have a three-byte signature code which identifies the device. This code can be read in both serial and parallel mode, also when the device is locked. The three bytes reside in a separate address space. The AT90SCR100 signature bytes are given in Table 29-6. 29.3.2 Serial Number The Serial Number is composed of 9 bytes. You can only read these bytes. They are pro- grammed during probe sessions and are unique for each die. They are composed of: • SN0: Chip ID: same for all AT90SCR100 ICs • SN1: Silicon Revision Table 29-5. Fuse Low Byte Fuse Low Byte Bit No Description Default Value -7 - 1 CKOUT(1) 6 Clock output 1 (unprogrammed) SUT1 5 Select start-up time 1 (unprogrammed)(2) SUT0 4 Select start-up time 0 (programmed)(2) CKSEL3 3 Select Clock source 1 (unprogrammed) -2 - 0 (3) -1 - 0 (3) CKSEL0 0 Select Clock source 1 (unprogrammed) Table 29-6. Device and JTAG ID Part Signature Bytes Address JTAG 0x000 0x001 0x002 Part Number Manufacture ID AT90SCR100 0x1E 0x96 0x09 96C1 0x1F |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |