MPC5606S datasheet(22/136 Pages) FREESCALE

22 / 136 page

MPC5606S Microcontroller Data Sheet, Rev. 6

Freescale Semiconductor

— 8-bit mono

— 8-bit color multiplexed

—RGB565

— 16-bit/18-bit RAW color

•

Supported synchronization modes:

— Embedded ITU-R BT.656-4 (RGB565 mode 2)

— HSYNC, VSYNC

— Data Enable

•

Direct interface with DCU background plane FIFO

•

Synchronization generation for the DCU

1.6.26

Liquid Crystal Display (LCD) driver

The LCD driver module has two configurations allowing a maximum of 160 or 228 LCD segments:

•

Up to 40 frontplane drivers and 4 backplane drivers

•

Up to 38 frontplane drivers and 6 backplane drivers

Each segment is controlled and can be masked by a corresponding bit in the LCD RAM.

Four to six multiplex modes (1/1, 1/2, 1/3, 1/4, 1/5, 1/6 duty), and three bias (1/1, 1/2, 1/3) methods are available. All frontplane

and backplane pins can be multiplexed with other port functions.

The LCD driver module features the following:

•

Programmable frame clock generator from different clock sources:

— System clock

— Internal RC oscillator

•

Programmable bias voltage level selector

•

On-chip generation of all output voltage levels

— LCD voltage reference taken from main 5V supply

•

LCD RAM – contains the data to be displayed on the LCD

— Data can be read from or written to the display RAM at any time

•

End of Frame interrupt:

— To optimize the refresh of the data without visual artefact

— Selectable number of frames between each interrupt

•

Contrast adjustment using programmable internal voltage reference

•

Remapping capability of 4 or 6 backplanes with frontplanes;

— To increase pin selection flexibility

•

In low power modes, the LCD operation can be suspended under software control. The LCD can also operate in low

power modes, clocked by the internal 128 kHz IRC or external 32 KHz crystal oscillator

•

Selectable output current boost during transitions

1.6.27

Stepper Motor Controller (SMC)

The SMC module is a PWM motor controller suitable to drive instruments in a cluster configuration or any other loads requiring

a PWM signal. The motor controller has twelve PWM channels associated with two pins each (24 pins in total).

The SMC module includes the following features:

•

10/11-bit PWM counter

•

11-bit resolution with selectable PWM dithering function

MPC5606S 데이터시트(PDF) 22 Page - Freescale Semiconductor, Inc

MPC5606S 데이터시트(HTML) 22 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL