MPC5606S datasheet(17/136 Pages) FREESCALE

17 / 136 page

MPC5606S Microcontroller Data Sheet, Rev. 6

Freescale Semiconductor

•

Up to 16 single-ended inputs channels

— All channels configured to have alternate function as general purpose input/output pins

–

10-bit ± 3 counts accuracy (TUE)

•

External multiplexer support to increase up to 23 channels

— Automatic 1 × 8 multiplexer control

— External multiplexer connected to a dedicated input channel

— Shared register between the 8 external channels

•

Result register available for every non-multiplexed channel

•

Configurable Left or Right aligned result format

•

Supports for one-shot, scan and injection conversion modes

•

Injection mode status bit implemented on adjacent 16-bit register for each result

— Supports Access to Result and injection status with single 32-bit read

•

Independently enabling of function for channels:

—Offset Refresh

•

Conversion Triggering support

— Internal conversion triggering from periodic interrupt timer (PIT)

•

4 configurable analog comparator channels offering range comparison with triggered alarm

— Greater than

— Less than

— Out of range

•

All unused analog inputs can be used as general purpose input and output pins

•

Power Down mode

•

Optional support for DMA transfer of results

1.6.16

Deserial Serial Peripheral Interface (DSPI)

The deserial serial peripheral interface (DSPI) modules provide a synchronous serial interface for communication between the

MPC5606S MCU and external devices.

The DSPI features the following:

•

Up to two DSPI modules

•

Full duplex, synchronous transfers

•

Master or slave operation

•

Programmable master bit rates

•

Programmable clock polarity and phase

•

End-of-transmission interrupt flag

•

Programmable transfer baud rate

•

Programmable data frames from 4 to 16 bits

•

Up to 6 chip select lines available, depending on package and pin multiplexing, enable 64 external devices to be

selected using external muxing from a single DSPI

•

8 clock and transfer attributes registers

•

Chip select strobe available as alternate function on one of the chip select pins for deglitching

•

FIFOs for buffering up to 4 transfers on the transmit and receive side

•

General purpose I/O functionality on pins when not used for SPI

•

Queueing operation possible through use of eDMA

MPC5606S 데이터시트(PDF) 17 Page - Freescale Semiconductor, Inc

MPC5606S 데이터시트(HTML) 17 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL