| 전자부품 데이터시트 검색엔진 |
|
MPC5606S 데이터시트(PDF) 62 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC5606S 데이터시트(HTML) 62 Page - Freescale Semiconductor, Inc |
|
62 / 136 page ![]() MPC5606S Microcontroller Data Sheet, Rev. 6 Freescale Semiconductor 62 • Do not: — Violate injection current limit per IO/All IO pins as per specifications — Connect sensitive supplies/ground on noisy supplies/ground (that is, ADC, PLL, and OSC) — Use SMD supply for generation of noise free supply as these are most noisy lines in the system — Connect different VDD pins (connected together inside the device) to different potentials. 3.5 Thermal characteristics 3.5.1 General notes for specifications at maximum junction temperature An estimate of the chip junction temperature, TJ, can be obtained from Equation 1: TJ = TA + (RJA PD) Eqn. 1 where: TA = ambient temperature for the package (°C) RJA = junction to ambient thermal resistance (°C/W) PD = power dissipation in the package (W) Table 17. LQFP thermal characteristics Symbol C Parameter Conditions Value Unit 144-pin 176-pin RJA CC D Thermal resistance, junction-to-ambient natural convection1 1 Junction-to-ambient thermal resistance determined per JEDEC JESD51-3 and JESD51-6. Thermal test board meets JEDEC specification for this package. Single layer board—1s 50 43 °C/W CC Four layer board—2s2p 41 35 °C/W RJMA CC D Thermal resistance, junction-to-moving-air ambient2 @ 200 ft./min., single layer board—1s 41 35 °C/W CC @ 200 ft./min., four layer board—2s2p 35 30 °C/W RJB CC D Thermal resistance, junction-to-board2 2 Junction-to-board thermal resistance determined per JEDEC JESD51-8. Thermal test board meets JEDEC specification for the specified package. —29 24 °C/W RJCtop CC D Thermal resistance, junction-to-case (top)3 3 Junction-to-case at the top of the package determined using MIL-STD 883 Method 1012.1. The cold plate temperature is used for the case temperature. Reported value includes the thermal resistance of the interface layer. —10 9 °C/W JT CC D Junction-to-package top thermal characterization parameter, natural convection4 4 Thermal characterization parameter indicating the temperature difference between the package top and the junction temperature per JEDEC JESD51-2. When Greek letters are not available, the thermal characterization parameter is written as Psi-JT. —2 2 °C/W |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |