전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

AN3077 데이터시트(PDF) 40 Page - STMicroelectronics

부품명 AN3077
상세설명  Safety application guide
PDF  82 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

AN3077 데이터시트(HTML) 40 Page - STMicroelectronics

Back Button AN3077 Datasheet HTML 36Page - STMicroelectronics AN3077 Datasheet HTML 37Page - STMicroelectronics AN3077 Datasheet HTML 38Page - STMicroelectronics AN3077 Datasheet HTML 39Page - STMicroelectronics AN3077 Datasheet HTML 40Page - STMicroelectronics AN3077 Datasheet HTML 41Page - STMicroelectronics AN3077 Datasheet HTML 42Page - STMicroelectronics AN3077 Datasheet HTML 43Page - STMicroelectronics AN3077 Datasheet HTML 44Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 40 / 82 page
background image
Functional safety requirements for application software
AN3077
40/82
DocID16384 Rev 10
the ADC samples the internally generated voltage while in the sampling phase the ADC
samples analog input coming from pads (See Figure 10).
Reference voltage which can be used during presampling phase is either
VDD_HV_ADR0/1 or VSS_HV_ADR0/1.
If there is an open failure in the analog multiplexing circuitry, the signal converted by
the ADC is not the analog input coming from the pad, but the presampling reference
voltage (VDD_HV_ADR0/1 or VSS_HV_ADR0/1).
This BIST must be run for each analog input used by the safety function.
Since the pads dedicated to analog inputs are of type INPUT, a missing enable from
the SIUL results in an open failure.
Note:
Rationale: To detect open failures of the channel multiplexing circuitry (See Figure 9)
Figure 9. Software BISTs to test the multiplexing circuitry (ADC_SWTEST_TEST1)
Note:
Implementation hint: Presampling can be enabled on a per channel basis through the
ADC_x_PSR0 register.
ADC_x_PSCR[PREVAL0] selects which reference voltage is used to precharge/discharge
the ADC internal capacitor.
ADC_x_PSCR[PRECONV] register shall be 0 (See “Analog-to-Digital Converter (ADC)”
chapter in the Device_Number Reference Manual for details on the presampling feature).
ADC
Reference
value 1
pins
ADC
Reference
value 1
pins
ADC
ADC
Presampling phase
Open detection:
Conversion phase



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com