| 전자부품 데이터시트 검색엔진 |
|
LAN9730 데이터시트(PDF) 23 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9730 데이터시트(HTML) 23 Page - Microchip Technology |
|
23 / 222 page ![]() 2012-2015 Microchip Technology Inc. DS00001946A-page 23 LAN9730/LAN9730i TABLE 2-5: USB PINS Num Pins Name Symbol Buffer Type Description 1 HSIC Data HSIC_DATA HSIC Bi-directional Double Data Rate (DDR) data sig- nal that is synchronous to the HSIC_STROBE signal as defined in the High-Speed Inter-Chip USB Electrical Specification, Version 1.0. 1 HSIC Strobe HSIC_STROBE HSIC Bi-directional data strobe signal as defined in the High-Speed Inter-Chip USB Electrical Specifica- tion, Version 1.0. 1 HSIC Slew Tune SLEW_TUNE IS (PD) Applies a 30% slew rate boost to the HSIC_DATA and HSIC_STROBE pins when driven high. 1 External USB Bias Resistor USBRBIAS AI Used for setting HS transmit current level and on- chip termination impedance. Connect to an exter- nal 12.0 kΩ 1.0% resistor to ground. TABLE 2-6: ETHERNET PHY PINS Num Pins Name Symbol Buffer Type Description 1 Ethernet TX Data Out Negative TXN AIO The transmit data outputs may be swapped inter- nally with receive data inputs when Auto-MDIX is enabled. 1 Ethernet TX Data Out Positive TXP AIO The transmit data outputs may be swapped inter- nally with receive data inputs when Auto-MDIX is enabled. 1 Ethernet RX Data In Nega- tive RXN AIO The receive data inputs may be swapped inter- nally with transmit data outputs when Auto-MDIX is enabled. 1 Ethernet RX Data In Posi- tive RXP AIO The receive data inputs may be swapped inter- nally with transmit data outputs when Auto-MDIX is enabled. 1 PHY Inter- rupt (Internal PHY Mode) nPHY_INT O8 In Internal PHY Mode, this pin can be configured to output the internal PHY interrupt signal. Note: The internal PHY interrupt signal is active-high. PHY Interrupt (External PHY Mode) nPHY_INT IS (PU) In External PHY Mode, the active-low signal on this pin is input from the external PHY and indi- cates a PHY interrupt has occurred. 1 External PHY Bias Resistor EXRES AI Used for the internal bias circuits. Connect to an external 12.0 kΩ 1.0% resistor to ground. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |