PC87373 datasheet(44/174 Pages) NSC

44 / 174 page

3.0 Device Architecture and Configuration (Continued)

www.national.com

Revision 1.1

3.7.2

SuperI/O Configuration 1 Register (SIOCF1)

Power Well: VDD3

Location:

Index 21h

Type:

Varies per bit

Bit

43210

Name

LOCKMCF

LOCKGCF Reserved (must be ‘01’)

IOWAIT

SWRST

GLOBEN

Reset

10001

Bit

Type

Description

R/W1S LOCKMCF (Lock Multiplexing Configuration). When set to 1, this bit locks the conﬁguration of

registers SIOCF1, SIOCF2, SIOCF3 and SIOCF4 by disabling writing to all bits in these registers

(including the LOCKMCF bit itself), except for the LOCKGCF, SWRST and GLOBEN bits in SIOCF1.

Once set, this bit can be cleared by VDD3 Power-Up reset (or Hardware reset).

0: R/W bits are enabled for write (default)

1: All bits are RO

R/W1S LOCKGCF (Lock GPIO Pins Configuration). When set to 1, this bit locks the conﬁguration registers

of all GPIO pins (see Section 3.14.2 on page 63) by disabling writes to all their bits (including the

LOCKGCF bit itself). The locked registers include the GPCFG1 (except LOCKCFP bit), GPEVR,

GPCFG2 and GPMODE registers of all GPIO pins. Once set, this bit can be cleared by VDD3 Power-

Up reset (or Hardware reset).

0: R/W bits are enabled for write (default)

1: All bits are RO

5-4

−

Reserved. These bits must be ‘01’.

3-2

R/W or

IOWAIT (Number of I/O Wait States). These bits set the number of wait states for I/O transactions

through the LPC bus.

Bits

3 2

Number of Wait States

0 0:

0 (default)

0 1:

1 0:

1 1:

R/W

SWRST (Software Reset). When set to 1, this bit triggers the Software reset sequence (see Section

2.2.5 on page 31), after which it returns to 0. Read always returns 0. This bit is not inﬂuenced by the

value of LOCKMCF.

0: Inactive (default)

1: Trigger the Software reset sequence

R/W or

GLOBEN (Global Device Enable). This bit makes it possible to disable all logical devices by setting a

single bit (to 0). In addition, when the bit is set to 1, it enables the operation of all the logical devices

of the PC87373, as long as the logical device is itself enabled (see Table 8 on page 35). The behavior

of the different devices is explained in Section 3.3 on page 40.

0: All logical devices in the PC87373 device are forced to be disabled and their resources are released.

1: Enables each PC87373 logical device that is itself enabled (default); see Section 3.3.1 on page 40.

PC87373 데이터시트(PDF) 44 Page - National Semiconductor (TI)

PC87373 데이터시트(HTML) 44 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL