LAN9250 datasheet(207/421 Pages) MICROCHIP

207 / 421 page

 2015 Microchip Technology Inc.

DS00001913A-page 207

LAN9250

11.15.13 HOST MAC CHECKSUM OFFLOAD ENGINE CONTROL REGISTER (HMAC_COE_CR)

This register controls the RX and TX checksum offload engines.

Offset:

0Dh

Size:

32 bits

Bits

Description

Type

Default

31:17

RESERVED

TX Checksum Offload Engine Enable (TX_COE_EN)

TX_COE_EN may only be changed if the TX path is disabled. If it is desired

to change this value during run time, it is safe to do so only after the Host

MAC is disabled and the TLI is empty.

0 = The TXCOE is bypassed

1 = The TXCOE is enabled

R/W

15:2

RESERVED

RX Checksum Offload Engine Mode (RX_COE_MODE)

This register indicates whether the COE will check for VLAN tags or a SNAP

header prior to beginning its checksum calculation. In its default mode, the

calculation will always begin 14 bytes into the frame.

RX_COE_MODE may only be changed if the RX path is disabled. If it is

desired to change this value during run time, it is safe to do so only after the

Host MAC is disabled and the TLI is empty.

0 = Begin checksum calculation after first 14 bytes of Ethernet Frame

1 = Begin checksum calculation at start of L3 packet by adjusting for

VLAN tags and/or SNAP header.

R/W

RX Checksum Offload Engine Enable (RX_COE_EN)

RX_COE_EN may only be changed if the RX path is disabled. If it is desired

to change this value during run time, it is safe to do so only after the Host

MAC is disabled and the TLI is empty.

0 = The RXCOE is bypassed

1 = The RXCOE is enabled

R/W

LAN9250 데이터시트(PDF) 207 Page - Microchip Technology

LAN9250 데이터시트(HTML) 207 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL