| 전자부품 데이터시트 검색엔진 |
|
IMX6SDLCEC 데이터시트(PDF) 103 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
IMX6SDLCEC 데이터시트(HTML) 103 Page - NXP Semiconductors |
|
103 / 169 page ![]() Electrical Characteristics i.MX 6Solo/6DualLite Applications Processors for Consumer Products, Rev. 9, 11/2018 NXP Semiconductors 103 The maximum accuracy of UP/DOWN edge of controls is: The maximum accuracy of UP/DOWN edge of IPP_DATA is: The DISP_CLK_PERIOD, DI_CLK_PERIOD parameters are programmed through the registers. IP13o Offset of VSYNC Tovs VSYNC_OFFSET × Tdiclk VSYNC_OFFSET—offset of Vsync edges from a local start point, when a Vsync should be active, in DI_CLK ×2 (0.5 DI_CLK Resolution). The VSYNC_OFFSET should be built by suitable DI’s counter. ns IP8o Offset of HSYNC Tohs HSYNC_OFFSET × Tdiclk HSYNC_OFFSET—offset of Hsync edges from a local start point, when a Hsync should be active, in DI_CLK ×2 (0.5 DI_CLK Resolution). The HSYNC_OFFSET should be built by suitable DI’s counter. ns IP9o Offset of DRDY Todrdy DRDY_OFFSET × Tdiclk DRDY_OFFSET—offset of DRDY edges from a suitable local start point, when a corresponding data has been set on the bus, in DI_CLK ×2 (0.5 DI_CLK Resolution). The DRDY_OFFSET should be built by suitable DI’s counter. ns 1Display interface clock period immediate value. DISP_CLK_PERIOD—number of DI_CLK per one Tdicp. Resolution 1/16 of DI_CLK. DI_CLK_PERIOD—relation of between programing clock frequency and current system clock frequency Display interface clock period average value. 2 DI’s counter can define offset, period and UP/DOWN characteristic of output signal according to programed parameters of the counter. Same of parameters in the table are not defined by DI’s registers directly (by name), but can be generated by corresponding DI’s counter. The SCREEN_WIDTH is an input value for DI’s HSYNC generation counter. The distance between HSYNCs is a SCREEN_WIDTH. Table 67. Synchronous Display Interface Timing Characteristics (Pixel Level) (continued) ID Parameter Symbol Value Description Unit Tdicp Tdiclk DISP_CLK_PERIOD DI_CLK_PERIOD ---------------------------------------------------- × for integer DISP_CLK_PERIOD DI_CLK_PERIOD ---------------------------------------------------- , Tdiclk floor DISP_CLK_PERIOD DI_CLK_PERIOD ---------------------------------------------------- 0.5 0.5 ± + for fractional DISP_CLK_PERIOD DI_CLK_PERIOD ---------------------------------------------------- , = Tdicp Tdiclk DISP_CLK_PERIOD DI_CLK_PERIOD ---------------------------------------------------- × = Accuracy 0.5 Tdiclk × () 0.62ns ± = Accuracy Tdiclk 0.62ns ± = |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |