HCS08 datasheet(66/198 Pages) NXP

66 / 198 page

Chapter 5 Resets, Interrupts, and General System Control

MC9S08QD4 Series MCU Data Sheet, Rev. 6

Freescale Semiconductor

Table 5-13. SPMSC2 Register Field Descriptions

Field

Description

LVWF

Low-Voltage Warning Flag — The LVWF bit indicates the low voltage warning status.

0 Low voltage warning not preset.

1 Low voltage warning is present or was present.

LVWACK

Low-Voltage Warning Acknowledge — The LVWACK bit is the low-voltage warning acknowledge.

Writing a 1 to LVWACK clears LVWF to a 0 if a low voltage warning is not present.

LVDV

Low-Voltage Detect Voltage Select — The LVDV bit selects the LVD trip point voltage (VLVD).

0 Low trip point selected (VLVD = VLVDL).

1 High trip point selected (VLVD = VLVDH).

LVWV

Low-Voltage Warning Voltage Select — The LVWV bit selects the LVW trip point voltage (VLVW).

0 Low trip point selected (VLVW = VLVWL).

1 High trip point selected (VLVW = VLVWH).

PPDF

Partial Power Down Flag — The PPDF bit indicates that the MCU has exited the stop2 mode.

0 Not stop2 mode recovery.

1 Stop2 mode recovery.

PPDACK

Partial Power Down Acknowledge — Writing a 1 to PPDACK clears the PPDF bit.

PPDC

Partial Power Down Control — The write-once PPDC bit controls whether stop2 or stop3 mode is selected.

0 Stop3 mode enabled.

1 Stop2, partial power down, mode enabled.

HCS08 데이터시트(PDF) 66 Page - NXP Semiconductors