6402 datasheet(88/250 Pages) INTEL

88 / 250 page

Clocking

Intel® 6400/6402 Advanced Memory Buffer Datasheet

8.10.4

Spread Spectrum Support

The AMB PLL will support Spread Spectrum Clocking (SSC). SSC is a frequency

modulation technique for EMI reduction. Instead of maintaining a constant frequency,

SSC modulates the clock frequency/period along a modulation profile.The AMB is

designed to support a nominal modulation frequency of 30-33 kHz with a downspread

of 0.5%.

See the High Speed Differential Point-to-Point Link at 1.5 V for Fully Buffered DIMM

Specification and the Circuit Architecture Specifications for the DDR, FBD and PLL

custom I/Os for more details.

8.10.5

Frequency of Operation

The PLL’s support a range of operation that exceeds the AMB’s functional range. This

allows the AMB to be tested at a higher frequency than the maximum specification to

provide test guardband. Lower frequencies are supported to allow system debug. The

PLL will also operate with the REFCLK at 100 MHz during transparent mode testing.

8.10.6

RESET#

The externally generated RESET# signal indicates when the core voltage is up and

reference clocks are stable. The core will use an asserted RESET# to asynchronously

put the AMB in reset, and to hold the AMB in reset. For details see the reset chapter.

External clocks dependent on PLL’s are DDR clocks and strobes, and SMBus clock.

8.10.7

Other PLL Characteristics

The PLL VCOs oscillate continually from power-up. At all other times, PLL output

dividers track the VCO, providing pulses to the clock trees. Logic that does not receive

an asynchronous reset can thus be reset “synchronously”.

A “locked” PLL will only serve to prove that the feedback loop is continuous. It will not

prove that the entire clock tree is continuous. The PLL is disabled for leakage test.

6402 데이터시트(PDF) 88 Page - Intel Corporation