6402 datasheet(64/250 Pages) INTEL

64 / 250 page

Debug and Logic Analyzer Mode

Intel® 6400/6402 Advanced Memory Buffer Datasheet

Each lane in the bus can be selected by the EVTYPE parameter to be a pulse (trigger)

event or a level (qualifier) event. Timing for the input and output filters is set by the

EVT parameter which defines the Tmin in core clock cycles. Both of these parameters

reside in the EVBUS control register along with the local event select controls for each

lane in the bus.

Pulse mode timing:

Input: Inputs are digitally filtered to reduce spurious events from bus ringing. Once

a rising edge is detected a single one clock width pulse event is sent to the local

events. No further pulse events are permitted until the next rising edge that occurs

after the longer of either (2 * Tmin) or (T_source_event_actual + T min).

Output: An output high pulse of length Tmin or T_local event_actual (whichever is

longer) is sourced whenever triggered by the selected local event. This is followed

by an output low pulse of length Tmin. Further toggling by the selected local event

is ignored until this output sequence is complete.

Level mode timing:

Input: Once a rising edge is detected the local event is asserted and remains

asserted for Tmin or T_source_event_actual which ever is longer.

Output: An output high pulse of length Tmin or T_local event_actual (whichever is

longer) is sourced whenever triggered by the selected local event.

Figure 5-7 shows the event signal timing.

Figure 5-6. EVBus Overview

Output

Filter

ENB

“1”

Input

Filter

EVBus

Event

Select

Local

Events

EVBus

Local

Event

bus to

other LAI

EV Bus System Topology

6402 데이터시트(PDF) 64 Page - Intel Corporation