XPC8260ZUIFBC datasheet(49/50 Pages) FREESCALE

49 / 50 page

MPC8260A PowerQUICC™ II Integrated Communications Processor Hardware Specifications, Rev. 2.0

Freescale Semiconductor

Document Revision History

0.9

8/2003

• Note: In revision 0.3, sp30 (Table 10) was changed. This change was not previously recorded in this

“Document Revision History” Table.

• Removal of “HiP4 PowerQUICC II Documentation” table. These supplemental specifications have

been replaced by revision 1 of the

MPC8260 PowerQUICC II™ Family Reference Manual.

• Figure 1 and Section 1, “Features”: Addition of MPC8255 notes

• Addition of Figure 2

• Addition of VCCSYN to “Note: Core, PLL, and I/O Supply Voltages” following Table 2

• Addition of note 1 to Table 3

• Table 4: Changes to

θJA and θJB and θJC.

• Addition of notes or modifications to Figure 6, Figure 7, and Figure 8

• Table 9: Change of sp10.

• Addition of Table 15.

• Addition of note 2 to Table 21

• Table 21: Addition of FCC2 Rx and Tx [3,4] to CPM pins PD7, PD18, PD19, and PD29. Also, the

addition of SPICLK to PC19. They are documented correctly in the parallel I/O ports chapter in the

MPC8260 PowerQUICC II™ Family Reference Manual but had previously been omitted from

Table 21.

0.8

1/2003

• Table 2: Modification to supply voltage ranges reflected in notes 2, 3, and 4.

• Table 4: Addition of

θJB and θJC.

• Table 7, Figure 8: Addition of sp42a/sp43a.

• Figure 3, Figure 4: Addition of note for FCC output.

• Figure 5, Figure 6, Figure 7: Addition of notes.

• Table 14, Table 17, and Table 19: Removal of PLL bypass mode from clock tables.

0.7

5/2002

• Section 1, “Features”: minimum supported core frequency of 150 MHz

• Section 1, “Features”: updated performance values (under “Dual-issue integer core”)

• Table 2: Note 2 (changes in italics): “...

less than or equal to 233 MHz, 166 MHz CPM...”

• Table 2: Addition of note 3.

0.6

3/2002

• Table 21: Modified notes to pins AE11 and AF25.

0.5

3/2002

• Table 21: Modified notes to pins AE11 and AF25.

• Table 21: Addition of note to pins AA1 and AG4 (Therm0 and Therm1).

0.4

2/2002

• Note 2 for Table 2 (changes in italics): “...greater than

or equal to 266 MHz, 200 MHz CPM...”

• Table 19: Core and bus frequency values for the following ranges of MODCK_HMODCK: 0011_000

to 0011_100 and 1011_000 to 1011_1000

• Table 21: Notes added to pins at AE11, AF25, U5, and V4.

0.3

11/2001

• Table 1: note 3

• Section 2.1: Removal of “Warning” recommending use of bootstrap diodes. They are not needed.

• Table 9: Change to sp12.

• Table 10: Change to sp32.

• Note 2 for Table 16 and Table 17

• Addition of note at beginning of Section 3.2

• Note 1 for Table 18 and Table 19

• Table 21: Additions to B27, C28, D25, D27, E26, G29, H26–28, N25, P29, AF25, AA25, AB27

0.2

11/2001

• Revision of Table 5, “Power Dissipation”

• Modifications to Figure 9, Table 2,Table 10, Table 11, and Table 18

• Modification to pinout diagram, Figure 13

• Additional revisions to text and figures throughout

0.1

8/2001

• Table 8: Change to sp20/sp21.

—

Initial version

Table 23. Document Revision History (continued)

Revision

Date

Substantive Changes

XPC8260ZUIFBC 데이터시트(PDF) 49 Page - Freescale Semiconductor, Inc

XPC8260ZUIFBC 데이터시트(HTML) 49 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

데이터시트 다운로드

링크 URL