전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

AN4228 데이터시트(PDF) 31 Page - STMicroelectronics

부품명 AN4228
상세설명  Migrating from STM32F1 to STM32F3 microcontrollers
PDF  90 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

AN4228 데이터시트(HTML) 31 Page - STMicroelectronics

Back Button AN4228 Datasheet HTML 27Page - STMicroelectronics AN4228 Datasheet HTML 28Page - STMicroelectronics AN4228 Datasheet HTML 29Page - STMicroelectronics AN4228 Datasheet HTML 30Page - STMicroelectronics AN4228 Datasheet HTML 31Page - STMicroelectronics AN4228 Datasheet HTML 32Page - STMicroelectronics AN4228 Datasheet HTML 33Page - STMicroelectronics AN4228 Datasheet HTML 34Page - STMicroelectronics AN4228 Datasheet HTML 35Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 31 / 90 page
background image
DocID024110 Rev 5
31/90
AN4228
Peripheral migration
89
3.11
PWR interface
In STM32F3 series the PWR controller presents some differences vs. STM32F1 series,
these differences are summarized in the table below. However, the programming interface is
unchanged.
Table 18. PWR differences between STM32F1 and STM32F3 series
PWR
STM32F1 series
STM32F3 series
Power supplies
–VDD = 2.0 to 3.6 V: external power supply
for I/Os and the internal regulator.
Provided externally through VDD pins.
–VSSA, VDDA = 2.0 to 3.6 V: external
analog power supplies for ADC, Reset
blocks, RCs and PLL. VDDA and VSSA
must be connected to VDD and VSS,
respectively.
–VBAT = 1.8 to 3.6 V: power supply for
RTC, external clock 32 kHz oscillator and
backup registers (through power switch)
when VDD is not present.
–VDD = 2.0 to 3.6 V: external power supply for
I/Os and the internal regulator. Provided
externally through VDD pins.
–VSSA, VDDA = 2.0 to 3.6 V: external analog
power supplies for ADC, DAC, Reset blocks,
RCs and PLL. VSSA must be connected to VSS.
–VBAT = 1.65 to 3.6 V: power supply for RTC,
external clock 32 kHz oscillator and backup
registers (through power switch) when VDD is
not present.
–VSSSD, VDDSDx = 2.0 to 3.6V: external analog
power supplies for SDADCx peripherals and
some GPIOs (STM32F37xx only).
Battery backup
domain
– Backup registers
–RTC
–LSE
– PC13 to PC15 I/Os
– Backup registers
–RTC
–LSE
– RCC Backup Domain Control Register
Wake-up
sources
Standby mode
– WKUP pin rising edge
Standby mode
– WKUP1, WKUP2 or WKUP3 pin rising edge



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com