| 전자부품 데이터시트 검색엔진 |
|
AR8327-AL1A-R 데이터시트(PDF) 87 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
AR8327-AL1A-R 데이터시트(HTML) 87 Page - List of Unclassifed Manufacturers |
|
87 / 394 page ![]() Atheros Communications, Inc. AR8327/AR8327N Seven-port Gigabit Ethernet Switch • 87 Table 3-42 summarizes the SGMII_CTRL Register. Table 3-42. SGMII Control Register Bit R/W Inital Value Mnemonic Description 31 R/W 1 full_duplex_25m Full_duplex in the base-page of base-x for Auto- Negotiation. 30 R/W 1 half_duplex_25m half_duplex in the base-page of base-x for Auto- Negotiation. 29:28 R/W 00 Remote_fault_25m Remote_fault[1:0] in the base-page of base-x for Auto-Negotiation. Generated by the remote_fault logic internal MAC. 27 R/W 0 Next_page_25m Next_page index in the base-page of base-x and SGMII PHY/MAC for Auto-Negotiation. 26 R/W 1 pause_25m pause in the base-page of base-x and SGMII-PHY/ MAC for Auto-Negotiation. This part is not included in the standard for SGMII. 25 R/W 1 asym_pause_25m asym_pause in the base-page of base-x and SGMII- PHY/MAC for Auto-Negotiation. This part is not included in the standard for SGMII. 24 R/W 1 Pause_sg_tx_en_25m Enable transmitting pause in the base-page of base- x and SGMII-PHY/MAC for Auto-Negotiation. 23:22 R/W 0 mode_ctrl_25m Mode_ctrl signal for mode selection among BASE- X(2'h0), SGMII-PHY(2'h1), .and SGMII-MAC(2'h2). 21 R/W 0 Mr_loopback, force_speed Indicate loopback from MII register of cooper PHY. And Force speed control signal. 20 R/W 0 mr_reg4_ch_25m Indicate register 4 has changed. 19 R/W 0 auto_lpi_25m When rx_lpi_active active for once, the register will latch this to indicate that the link-partner. 18 R/W 0 Prbs_en Enable serdes prbs test function. 17 R/W 0 Sgmii_th_los[1] Combined with bit15, Signal detection threshold setting control 00, default; 01, -2dB; 10/11, +2dB 16 R/W 0 Dis_auto_lpi_25m Disable the auto-detect link-partner's az ability. 15 R/W 0 Sgmii_th_los[0] Same as bit17 14:13 R/W 11 sgmii_cdr_bw CDR digital accumulator length control 00: +/-0, 01 : +/-2, 10: +/-4, 11: +/-8 12:10 R/W 3’b001 sgmii_txdr_ctrl Default = 001 000, driver output Vdiff,pp=500mv 001, 600mv; 010, 700mv; 011, 800mv; 100, 900mv; 101, 1v; 110, 1.1v; 111, 1.2v 9:8 R/W 0 sgmii_fiber_mode 00, not in fiber mode 01, Reserved 10, Reserved 11, 1000Base-FX mode 7 R/W 1 sgmii_sel_clk125m 0, sgmii_clk125m_rx_delay is not delayed 1, sgmii_clk125m_rx_delay is delayed by 2ns |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |