| 전자부품 데이터시트 검색엔진 |
|
AR8327-AL1A-R 데이터시트(PDF) 49 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
AR8327-AL1A-R 데이터시트(HTML) 49 Page - List of Unclassifed Manufacturers |
|
49 / 394 page ![]() Atheros Communications, Inc. AR8327/AR8327N Seven-port Gigabit Ethernet Switch • 49 63 RESERVED 62 SA_DROP_EN Drop packet enable when source address is in this entry. If this bit is set to 1’b1, the packet with SA of this entry will be dropped. 61 MIRROR_EN 1 Indicates packets should be sent to mirror port and destination port. 0 Indicate packets should only be sent to destination port 60 PRI_EN Priority override enable. 1: Indicates PRIORITY (ATU[58:56]) can override any other priority determined by the frame’s data. 59 SVL_ENTRY 1’b1: SVL learned 1’b0: IVL learned 58:56 PRIORITY The priority bits may be used as the frame’s priority when “PRI_OVER_EN” (bit[60]) is set to one. 55 CROSS_PORT_STATE _EN 1’b1: Cross port state enable 1’b0: Cross port state disable 54:48 DES_PORT Indicate which ports are associated with this MAC address when they are set to one. Bit [48] is assigned to port0, bit [49] to port1, bit [50] to port3, and so on. If all bits are set to zero and the entry is static, the packet should be dropped. For multicast address and unicast for link aggregation, more than one bit is set to one. 47:0 ADDRESS 48-bit MAC address Table 2-32. Bit Name Description Table 2-33. RESERVED ATU Entry Bit Name Description 64 STATUS 1’b1: static and valid 1’b0: invalid 63 COPY_TO_CPU 1’b1: packet received with the address should be copied to the CPU port 62 REDIRECT_TO_CPU 1’b1: packet received with this address should be redirected to the CPU port. If no CPU is connected to the switch, the packet will be dropped. 61 LEAKY_EN 1’b1: use leaky VLAN enable for this MAC address This bit can be used for unicast and multicast frames, controlled by ARL_uni_leaky_en and ARL_multi_leaky_en 60 MIRROR_EN 1’b1: indicates packets should be sent to the mirror port and the destination port 1’b0: indicates packets should be sent only to the destination port 59 PRI_OVER_EN Priority override enable 1’b1: indicate PRIORITY (ATU[58:56]) can override any other priority determined by the frame’s data 58:56 PRI This priority bit may be used as a frame’s priority when PRI_OVER_EN is set to one 55 CROSS_PORT_STATE _EN 1’b1: cross port state enabled |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |