HCS08 datasheet(283/316 Pages) NXP

283 / 316 page

MC9S08SG8 MCU Series Data Sheet, Rev. 8

Freescale Semiconductor

283

Appendix A



Electrical Characteristics

A.1

Introduction

This section contains electrical and timing specifications for the MC9S08SG8 Series of microcontrollers

available at the time of publication.

The MC9S08SG8 Series includes both:

•

Standard (STD) – devices that are standard-temperature rated.

•

AEC Grade 0 – devices that are high-temperature rated.

A.2

Parameter Classification

The electrical parameters shown in this supplement are guaranteed by various methods. To give the

customer a better understanding the following classification is used and the parameters are tagged

accordingly in the tables where appropriate:

NOTE

The classification is shown in the column labeled “C” in the parameter

tables where appropriate.

A.3

Absolute Maximum Ratings

Absolute maximum ratings are stress ratings only, and functional operation at the maxima is not

guaranteed. Stress beyond the limits specified in Table A-2 may affect device reliability or cause

permanent damage to the device. For functional operating conditions, refer to the remaining tables in this

section.

Table A-1. Parameter Classifications

Those parameters are guaranteed during production testing on each individual device.

Those parameters are achieved by the design characterization by measuring a statistically relevant

sample size across process variations.

Those parameters are achieved by design characterization on a small sample size from typical devices

under typical conditions unless otherwise noted. All values shown in the typical column are within this

category.

Those parameters are derived mainly from simulations.

HCS08 데이터시트(PDF) 283 Page - NXP Semiconductors