CC1110-RTR1 datasheet(96/203 Pages) TI

96 / 203 page

CC1110

CC1110 PRELIMINARY Datasheet (Rev. 1.01) SWRS033A

Page 96 of 202

0000h

1 - Set output on compare

2 - Clear output on compare

3 - Toggle output on compare

6 - Clear when T1CC0, set when T1CCn

7 - Set when T1CC0, clear when T1CCn

T1CCn

T1CC0

T1CCn

4 - Set output on compare-up,

clear on compare-down

5 - Clear output on compare-up,

set on compare-down

T1CCn

Figure 18: Output modes, timer up/down mode

13.3.9 Timer 1 Interrupts

There is one interrupt vector assigned to the

timer. An interrupt request is generated when

one of the following timer events occur:

•

Counter reaches terminal count value.

•

Input capture event.

•

Output compare event

The

bits

T1CTL.OVFIF,

T1CTL.CH0IF,

T1CTL.CH1IF,

and

T1CTL.CH2IF contains the interrupt flags for

the terminal count value event, and the three

channel compare/capture events, respectively.

An interrupt request is only generated when

the corresponding interrupt mask bit is set.

The interrupt mask bits are T1CCTL0.IM,

T1CCTL1.IM,

T1CCTL2.IM

and

CC1110-RTR1 데이터시트(PDF) 96 Page - Texas Instruments

CC1110-RTR1 데이터시트(HTML) 96 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL