301020013 datasheet(4/109 Pages) AMSOSRAM

4 / 109 page

Dragster

General description

Datasheet • PUBLIC • Document Feedback

DS000444 • v5-00 • 2025-Aug-29

4 / 109

Dragster Line scan sensor

General description

Dragster is a platform of digital line-scan sensors. The sensor family is made using three types

of basic elements: A single line element from 2K to 8K pixel resolution (7 μm pixel size and

pitch), a dual line element from 2K to 8K pixel resolution (7 μm pixel size and pitch) and a

single line element from 4K to 16K pixel resolution (3.5 μm (H) x 3.5 μm (V) pixel size). The

chip versions with dual line are optionally available with Bayer Pattern RGB filters placed on

the sensors.

The sensor features a low noise pixel with true CDS and global shutter for interleaved readout

and integration operation. Each pixel has an on pixel 13-bit ADC and its gain can be

programmed in a range of -6 dB till +20 dB by means of an 8-bit DAC controlled over the serial

configuration interface.

The readout is made by two 13-bit wide digital taps organized in odd/even order for each 2K

segment. For each line segment, 2K (7 μm pixel) or 4K (3.5 μm pixel), all pixels are read out.

For sensor versions with 3.5 μm pixel pitch, two 2K segment readout circuits are placed on

each side of the pixel line, to lead to a basic segment of 4K pixels, where even pixels are read

out over the bottom readout and odd pixels are read out over the top readout.

Start and end of integration, as well as optional start of readout, are started upon individual

external trigger events.

To enhance dynamic range multiple non-destructive readouts are possible.

301020013 데이터시트(PDF) 4 Page - ams-OSRAM AG