MPC8309EC datasheet(74/82 Pages) FREESCALE

74 / 82 page

MPC8309 PowerQUICC II Pro Integrated Communications Processor Family Hardware Specifications, Rev. 0

Freescale Semiconductor

Thermal

TA = ambient temperature for the package (C)

RJA = junction-to-ambient thermal resistance (C/W)

PD = power dissipation in the package (W)

The junction-to-ambient thermal resistance is an industry standard value that provides a quick and easy

estimation of thermal performance. As a general statement, the value obtained on a single layer board is

appropriate for a tightly packed printed-circuit board. The value obtained on the board with the internal

planes is usually appropriate if the board has low power dissipation and the components are well separated.

Test cases have demonstrated that errors of a factor of two (in the quantity TJ – TA) are possible.

24.1.3

Estimation of Junction Temperature with Junction-to-Board

Thermal Resistance

The thermal performance of a device cannot be adequately predicted from the junction-to-ambient thermal

resistance. The thermal performance of any component is strongly dependent on the power dissipation of

surrounding components. In addition, the ambient temperature varies widely within the application. For

many natural convection and especially closed box applications, the board temperature at the perimeter

(edge) of the package is approximately the same as the local air temperature near the device. Specifying

the local ambient conditions explicitly as the board temperature provides a more precise description of the

local ambient conditions that determine the temperature of the device.

At a known board temperature, the junction temperature is estimated using the following equation:

TJ =TB +(R

JB  PD)

Eqn. 2

where:

TJ = junction temperature (C)

TB = board temperature at the package perimeter (C)

RJB = junction-to-board thermal resistance (C/W) per JESD51-8

PD = power dissipation in package (W)

When the heat loss from the package case to the air can be ignored, acceptable predictions of junction

temperature can be made. The application board should be similar to the thermal test condition: the

component is soldered to a board with internal planes.

24.1.4

Experimental Determination of Junction Temperature

To determine the junction temperature of the device in the application after prototypes are available, the

thermal characterization parameter (



JT) can be used to determine the junction temperature with a

measurement of the temperature at the top center of the package case using the following equation:

TJ =TT +(JT  PD)

Eqn. 3

where:

TJ = junction temperature (C)

MPC8309EC 데이터시트(PDF) 74 Page - Freescale Semiconductor, Inc

MPC8309EC 데이터시트(HTML) 74 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82

데이터시트 다운로드

링크 URL