TNETV2501INPGF datasheet(145/197 Pages) TI1

145 / 197 page

Electrical Specifications

145

December 2002 − Revised November 2008

SPRS206K

5.6.5 EMIF Clock Options

Table 5−6 through Table 5−8 assume testing over recommended operating conditions (see Figure 5−5

through Figure 5−7).

Table 5−6. EMIF Timing Requirements for ECLKIN†‡

NO.

MIN

MAX

UNIT

tc(EKI)

Cycle time, ECLKIN

16P

tw(EKIH)

Pulse duration, ECLKIN high

0.4 * tc(EKI)

tw(EKIL)

Pulse duration, ECLKIN low

0.4 * tc(EKI)

E10

tt(EKI)

Transition time, ECLKIN

† P = 1/CPU clock frequency in ns. For example, when running parts at 300 MHz, use P = 3.33 ns.

‡ The reference points for the rise and fall transitions are measured at VIL MAX and VIH MIN.

Table 5−7. EMIF Switching Characteristics for ECLKOUT1§¶#

NO.

PARAMETER

MIN

MAX

UNIT

tc(EKO1)

Cycle time, ECLKOUT1

E − 1

E + 1

tw(EKO1H)

Pulse duration, ECLKOUT1 high

EH − 1

EH + 1

tw(EKO1L)

Pulse duration, ECLKOUT1 low

EL − 1

EL + 1

tt(EKO1)

Transition time, ECLKOUT1

td(EKIH-EKO1H)

Delay time, ECLKIN high to ECLKOUT1 high

td(EKIL-EKO1L)

Delay time, ECLKIN low to ECLKOUT1 low

§ The reference points for the rise and fall transitions are measured at VOL MAX and VOH MIN.

¶ E = the EMIF input clock (CPU clock, CPU/2 clock, or CPU/4 clock) period in ns for EMIF.

# EH is the high period of E (EMIF input clock period) in ns and EL is the low period of E (EMIF input clock period) in ns for EMIF.

ECLKIN

E10

Figure 5−5. ECLKIN Timings for EMIF

ECLKIN

ECLKOUT1

Figure 5−6. ECLKOUT1 Timings for EMIF Module

TNETV2501INPGF 데이터시트(PDF) 145 Page - Texas Instruments

TNETV2501INPGF 데이터시트(HTML) 145 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL