전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

DSP56362AD 데이터시트(PDF) 28 Page - Motorola, Inc

부품명 DSP56362AD
상세설명  24-Bit Audio Digital Signal Processor
PDF  168 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MOTOROLA [Motorola, Inc]
홈페이지  http://www.freescale.com
Logo MOTOROLA - Motorola, Inc

DSP56362AD 데이터시트(HTML) 28 Page - Motorola, Inc

Back Button DSP56362AD Datasheet HTML 24Page - Motorola, Inc DSP56362AD Datasheet HTML 25Page - Motorola, Inc DSP56362AD Datasheet HTML 26Page - Motorola, Inc DSP56362AD Datasheet HTML 27Page - Motorola, Inc DSP56362AD Datasheet HTML 28Page - Motorola, Inc DSP56362AD Datasheet HTML 29Page - Motorola, Inc DSP56362AD Datasheet HTML 30Page - Motorola, Inc DSP56362AD Datasheet HTML 31Page - Motorola, Inc DSP56362AD Datasheet HTML 32Page - Motorola, Inc Next Button
Zoom Inzoom in Zoom Outzoom out
 28 / 168 page
background image
1-20
DSP56362 Advance Information
MOTOROLA
Signal/Connection Descriptions
Serial Host Interface
MOSI
HA0
Input or
output
Input
Tri-stated
SPI Master-Out-Slave-In—When the SPI is
configured as a master, MOSI is the master data
output line. The MOSI signal is used in conjunction
with the MISO signal for transmitting and receiving
serial data. MOSI is the slave data input line when
the SPI is configured as a slave. This signal is a
Schmitt-trigger input when configured for the SPI
Slave mode.
I2C Slave Address 0—This signal uses a Schmitt-
trigger input when configured for the I2C mode.
When configured for I2C slave mode, the HA0
signal is used to form the slave device address.
HA0 is ignored when configured for the I2C master
mode.
This signal is tri-stated during hardware, software,
and individual reset. Thus, there is no need for an
external pull-up in this state.
This input is 5 V tolerant.
SS
HA2
Input
Input
Tri-stated
SPI Slave Select—This signal is an active low
Schmitt-trigger input when configured for the SPI
mode. When configured for the SPI Slave mode,
this signal is used to enable the SPI slave for
transfer. When configured for the SPI master mode,
this signal should be kept deasserted (pulled high).
If it is asserted while configured as SPI master, a
bus error condition is flagged. If SS is deasserted,
the SHI ignores SCK clocks and keeps the MISO
output signal in the high-impedance state.
I2C Slave Address 2—This signal uses a Schmitt-
trigger input when configured for the I2C mode.
When configured for the I2C Slave mode, the HA2
signal is used to form the slave device address.
HA2 is ignored in the I2C master mode.
This signal is tri-stated during hardware, software,
and individual reset. Thus, there is no need for an
external pull-up in this state.
This input is 5 V tolerant.
Table 1-10 Serial Host Interface Signals (Continued)
Signal Name
Signal Type
State
during
Reset
Signal Description
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com