68HC05PL4 datasheet(69/98 Pages) FREESCALE

69 / 98 page

April 30, 1998

GENERAL RELEASE SPECIFICATION

MC68HC05PL4

INSTRUCTION SET

REV 2.0

12-1

SECTION 12

INSTRUCTION SET

This section describes the addressing modes and instruction types.

12.1

ADDRESSING MODES

The CPU uses eight addressing modes for exibility in accessing data. The

addressing modes de ne the manner in which the CPU nds the data required to

execute an instruction. The eight addressing modes are the following:

•

Inherent

•

Immediate

•

Direct

•

Extended

•

Indexed, No Offset

•

Indexed, 8-Bit Offset

•

Indexed, 16-Bit Offset

•

Relative

12.1.1 Inherent

Inherent instructions are those that have no operand, such as return from interrupt

(RTI) and stop (STOP). Some of the inherent instructions act on data in the CPU

registers, such as set carry ag (SEC) and increment accumulator (INCA).

Inherent instructions require no memory address and are one byte long.

12.1.2 Immediate

Immediate instructions are those that contain a value to be used in an operation

with the value in the accumulator or index register. Immediate instructions require

no memory address and are two bytes long. The opcode is the rst b yte, and the

immediate data value is the second byte.

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

68HC05PL4 데이터시트(PDF) 69 Page - Freescale Semiconductor, Inc

68HC05PL4 데이터시트(HTML) 69 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

데이터시트 다운로드

링크 URL